Torque Specifications
WARNING: This page is about a different car, the 2009 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
MANUAL TRANSMISSION / TRANSAXLE TORQUE SPECIFICATIONS
| Part Tightened | N*m | kgf*cm | ft.*lbf | |
|---|---|---|---|---|
| Shift lever assembly x Body | 12 | 122 | 9 | |
| Front No. 1 floor heat insulator x Body | 5.5 | 56 | 49 in.*lbf | |
| Transmission control cable assembly x Body | 5.0 | 51 | 44 in.*lbf | |
| Wire harness clamp bracket x Manual transaxle | 13 | 130 | 9 | |
| Wire harness clamp bracket x Manual transaxle | 26 | 260 | 19 | |
| Rear engine mounting bracket x Manual transaxle | 45 | 459 | 33 | |
| Front engine mounting bracket x Manual transaxle | 64 | 653 | 47 | |
| Engine mounting bracket LH x Manual transaxle | 52 | 530 | 38 | |
| Manual transmission case protector x Manual transaxle | 18 | 183 | 13 | |
| Manual transaxle x Engine | Bolt A | 64 | 652 | 47 |
| Bolt B | 64 | 652 | 47 | |
| Bolt C | 46 | 469 | 34 | |
| Bolt D | 46 | 469 | 34 | |
| Manual transaxle x Engine | 44 | 448 | 32 | |
| Manual transaxle case receiver x Manual transaxle case | 7.0 | 71 | 62 in.*lbf | |
| No. 1 gear shift head x No. 2 gear shift fork shaft | 24 | 245 | 18 | |
| No. 1 gear shift fork x No. 1 gear shift fork shaft | 24 | 245 | 18 | |
| Reverse shift arm bracket x Manual transaxle case | 17 | 173 | 13 | |
| No. 1 oil receiver pipe x Transmission case | 17 | 173 | 13 | |
| No. 2 oil receiver pipe x Transmission case | 17 | 173 | 13 | |
| transmission oil baffle x Manual transmission case | 17 | 173 | 13 | |
| Reverse restrict pin plug x Transmission case | 13 | 133 | 9.6 | |
| Transmission case x Manual transaxle case | 29 | 296 | 21 | |
| Reverse idler gear shaft bolt x Transmission case | 30 | 306 | 22 | |
| Rear bearing retainer x Transmission case | 43 | 438 | 32 | |
| No. 3 gear shift fork x No. 1 gear shift fork shaft | 24 | 245 | 18 | |
| Manual transmission output rear set nut x Output shaft | 123 | 1254 | 90 | |
| Drain plug x Transmission case | 49 | 500 | 36 | |
| Filler plug x Transmission case | 49 | 500 | 36 | |
| Control shift cover x Manual transaxle | 20 | 204 | 15 | |
| Back up light switch assembly x Manual transaxle | 40 | 408 | 30 | |
| Shift gate pin x Manual transaxle | 29 | 296 | 21 | |
| No. 1 lock ball assembly x Manual transaxle | 29 | 296 | 21 | |
| No. 2 clutch tube bracket x Manual transaxle | 15 | 153 | 11 | |
| Control shift lever x Shift and select lever shaft | 12 | 120 | 9 | |
| Selecting bellcrank assembly x Manual transaxle | 20 | 204 | 15 | |
| Speedometer driven gear sub-assembly x Manual transaxle | 5.5 | 56 | 48 in.*lbf | |
| Control cable bracket x Manual transaxle | 17 | 173 | 12 | |
| Selecting bellcrank support sub-assembly x No. 2 selecting bellcrank | 12 | 122 | 9 | |
| Front differential ring gear x Front differential case | 106 | 1080 | 78 | |