Navigation Receiver: Removal

REMOVE INSTRUMENT CLUSTER NO. 1 FINISH PANEL CENTER (See REMOVAL )
REMOVE INSTRUMENT CLUSTER NO. 2 FINISH PANEL CENTER
REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH (See REMOVAL )
REMOVE NAVIGATION RECEIVER ASSEMBLY WITH BRACKET
1. Remove the 4 screws.
2. Disconnect the connector and remove the navigation receiver assembly with bracket.
  
  Fig 1: Identifying Navigation Receiver Assembly Bracket Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE INSTRUMENT CLUSTER FINISH PANEL UPPER
1. Remove the 4 screws and the instrument cluster finish panel upper.
  
  Fig 2: Identifying Instrument Cluster Finish Panel Upper Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE NO. 1 NAVIGATION BRACKET
1. Remove the 4 screws and the No. 1 navigation bracket.
  
  Fig 3: Locating No. 1 Navigation Bracket Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE NO. 2 NAVIGATION BRACKET
1. Remove the 4 screws and the No. 2 navigation bracket from the navigation receiver assembly.
  
  Fig 4: Locating No. 2 Navigation Bracket Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002