LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Sienna LE, AWD >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Air Conditioning >> Integration Control And Panel >> Removal

Integration Control And Panel: Removal

  1. REMOVE INSTRUMENT CLUSTER FINISH PANEL CENTER NO.1  (See REMOVAL )
  2. REMOVE INSTRUMENT CLUSTER FINISH PANEL CENTER NO.2 
  3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY 

    HINT:

    (See REMOVAL for U151E, REMOVAL for U151F)

  4. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY CENTER  (See REMOVAL )
  5. REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH  (See REMOVAL )
  6. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET (w/o Navigation System)  (See REMOVAL )
  7. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET (w/ Navigation System) 
  8. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY 
    1. Remove the 4 screws, and release the integration control & panel assembly.
    2. Disconnect the connectors and remove the integration control & panel assembly.
      Fig 1: Locating Screws, And Integration Control & Panel Assembly
      G05144664Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals