Air Conditioning: Condenser: Reassembly

INSTALL COOLER DRYER
1. Using needle nose pliers, install the cooler dryer.
  
  Fig 1: Identifying Cooler Dryer
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install a new O-ring on the cap.
3. Sufficiently apply compressor oil to the fitting surfaces of the O-ring and the cap.
  Compressor oil:
  
  ND-OIL 8 or equivalent
  
  Fig 2: Locating O-ring On Cap
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Using a hexagon wrench 14 mm (0.55 in.), install the cap to the cooler condenser assembly.
  Torque: 2.9 N*m (30 kgf*cm, 25 in.*lbf)
  
  Fig 3: Identifying Cap And Cooler Condenser Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002