Problem Symptoms Table

If a normal system code is displayed during the DTC check, but the problem still occurs, check the circuits for each problem symptom in the order given in the table below and proceed to the relevant troubleshooting page.

HINT:

• Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
• Inspect the fuses and relays related to this system before inspecting the suspected areas below.

  Wireless Door Lock Control System 

  SYMPTOM CHART
  
  

  Symptom	Suspected Area	See
  Only wireless control function is Inoperative	Proceed to "Only wireless control function is inoperative"	ONLY WIRELESS CONTROL FUNCTION IS INOPERATIVE
  Answer-back function only does not operate normally.	Proceed to "No answer-back"	NO ANSWER-BACK
  Automatic lock function only does not operate normally.	Perform the operation check	OPERATION CHECK
  	Key reminder warning system (unlock warning switch circuit)	OPERATION CHECK
  	Lighting system (door courtesy light switch circuit)	DOOR COURTESY SWITCH CIRCUIT
  	Main body ECU	-
  Luggage compartment door open function only does not operate	Perform operation check	OPERATION CHECK
  	Luggage compartment door lock assembly	INSPECTION
  	Main body ECU	-
  	Wire harness or connector	-
  Illuminated entry function only does not operate.	Perform the operation check	OPERATION CHECK
  	Lighting system (illuminated entry function)	PROBLEM SYMPTOMS TABLE
  	Main body ECU	-
  Door ajar warning function only does not operate	Perform the operation check	OPERATION CHECK
  	Lighting system (door courtesy light switch circuit)	DOOR COURTESY SWITCH CIRCUIT
  	Main body ECU	-
  Panic alarm function only does not operate	Perform operation check	OPERATION CHECK
  	Horn system	-
  	Main body ECU	-