Customize Parameters

WARNING: This page is about a different car, the 2009 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.

CUSTOMIZING FUNCTION WITH TECHSTREAM

HINT:

The following items can be customized.

NOTE:

When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.

Connect the Techstream to the DLC3.
Turn the ignition switch to ON.
Turn the Techstream on.
Enter the following menus: Customize Setting / Door Lock.

Select the setting by referring to the table below.

Main Body

CUSTOMIZE SETTING REFERENCE

Tester Display

Default

Contents

Setting

Unlock Key Twice

Function that unlocks only driver side door when driver side door key cylinder is turned to UNLOCK once, and unlock all doors when it is turned to UNLOCK twice. For OFF setting, turning it once unlocks all doors.

ON/OFF

Auto Lock/Shift⁽¹⁾

Function that locks all doors when shift lever is shifted from P to any other position with engine running and all doors closed

ON/OFF

Auto Unlock/Shift⁽¹⁾

Function that unlocks all doors when shift lever is shifted to P from any other position while the ignition switch is ON

ON/OFF

All Unlock/Open-Close

OFF

Function that unlocks all doors when opening driver door within 10 seconds after turning the ignition switch is OFF

ON/OFF

Auto Lock

OFF

Function that locks all doors when vehicle speed reaches a certain level

ON/OFF

⁽¹⁾

for A/T