LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Sienna LE, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Door Lock) >> Door Control Receiver >> Removal

Door Control Receiver: Removal

WARNING: This page is about a different car, the 2009 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE REAR DOOR SCUFF PLATE RH 

    HINT:

    Use the same procedure for the RH side and the LH side (See REMOVAL ).

  2. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH 

    HINT:

    Use the same procedure for the RH side and the LH side (See REMOVAL ).

  3. REMOVE REAR SEAT CUSHION ASSEMBLY  (See REMOVAL )
  4. REMOVE REAR SEAT SIDE GARNISH RH 

    HINT:

    Use the same procedure for the RH side and the LH side (See REMOVAL ).

  5. REMOVE ROOF SIDE INNER GARNISH BOARD RH 

    HINT:

    Use the same procedure for the RH side and the LH side (See REMOVAL ).

  6. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY RH 

    HINT:

    Use the same procedure for the RH side and the LH side (See REMOVAL ).

  7. REMOVE DOOR CONTROL RECEIVER 
    1. Disconnect the connector.
    2. Remove the bolt and the door control receiver.
    Fig 1: Locating Door Control Receiver
    G06011330Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals