Steering Pad Switch: Removal

WARNING: This page is about a different car, the 2009 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.

PRECAUTION
(See AIRBAG SYSTEM )
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
REMOVE LOWER NO. 3 STEERING WHEEL COVER (See REMOVAL )
REMOVE LOWER NO. 2 STEERING WHEEL COVER (See REMOVAL )
REMOVE STEERING PAD (See REMOVAL )
REMOVE STEERING PAD SWITCH LH
1. Disconnect the pad switch connector from the spiral cable and disengage the clamp.
  
  Fig 1: Locating Pad Switch Connector With Clamp
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the screw.
3. Disengage the 2 pins and remove the steering pad switch LH.
Fig 2: Identifying Steering Pad Switch LH Pins And Screw
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE STEERING PAD SWITCH ASSEMBLY
1. Disconnect the pad switch connector from the spiral cable and disengage the clamp.
  
  Fig 3: Locating Pad Switch Connector With Clamp
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the screw.
3. Disengage the 2 pins and remove the steering pad switch.
  
  Fig 4: Identifying Steering Pad Switch Pins
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Disengage the clamp.
  
  Fig 5: Identifying Steering Pad Switch Clamp
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Remove the screw.
6. Disengage the 2 pins and remove the steering pad switch assembly.