Clutch Switch: Inspection
WARNING: This page is about a different car, the 2009 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT CLUTCH SWITCH ASSEMBLY
- Remove the clutch switch assembly (See CLUTCH SWITCH ).
- Measure the resistance according to the value(s) in the table below.
Standard Resistance
TESTER CONNECTION SPECIFIED CONDITION CHARTTester Connection Switch Condition Specified Condition 1-2 Switch pin free 10 kΩ or higher Switch pin pushed in Below 1 Ω If the result is not as specified, replace the clutch switch.