LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Sienna LE, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Front Suspension System) >> Front Strut Bar >> Removal

Front Strut Bar: Removal

WARNING: This page is about a different car, the 2009 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FRONT WIPER ARM HEAD CAP  (See ON-VEHICLE INSPECTION )
  2. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH  (See ON-VEHICLE INSPECTION )
  3. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH  (See REMOVAL )
  4. REMOVE HOOD TO COWL TOP SEAL  (See REMOVAL )
  5. REMOVE CENTER NO.1 COWL TOP VENTILATOR LOUVER  (See REMOVAL )
  6. REMOVE COWL TOP VENTILATOR LOUVER LH  (See REMOVAL )
  7. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY  (See REMOVAL )
  8. REMOVE OUTER COWL TOP PANEL  (See REMOVAL )
  9. REMOVE SUSPENSION TOWER DAMPER ASSEMBLY 
    1. Remove the 2 nuts and suspension tower damper assembly.
    Fig 1: Locating Suspension Tower Damper Assembly Nuts
    G06013562Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  10. REMOVE TOWER BAR BRACKET SUB-ASSEMBLY LH 
    1. Remove the 3 nuts and tower bar bracket sub assembly LH.
    Fig 2: Locating Tower Bar Bracket Sub Assembly LH Nuts
    G06013563Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  11. REMOVE TOWER BAR BRACKET SUB-ASSEMBLY RH 
    1. Remove the 3 nuts and tower bar bracket sub assembly RH.
    Fig 3: Locating Tower Bar Bracket Sub Assembly RH Nuts
    G06013564Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals