Engine Oil Cooler: Removal

REMOVE NO. 1 ENGINE UNDER COVER (See REMOVAL )
REMOVE EXHAUST PIPE ASSEMBLY
for 2WD:(See REMOVAL )

for 4WD:(See REMOVAL )
DRAIN ENGINE COOLANT (See REPLACEMENT )
DRAIN ENGINE OIL (See OIL PUMP )
REMOVE NO. 2 MANIFOLD STAY (See REMOVAL )
REMOVE NO. 2 EXHAUST MANIFOLD HEAT INSULATOR (See REMOVAL )
REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY LH (See REMOVAL )
REMOVE ENGINE OIL COOLER
1. Remove the bolt, 2 clamps, and 4 clips and disconnect the 2 water by-pass hoses.
  
  Fig 1: Locating Bolt, Clamps, And Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the oil cooler union bolt, oil cooler assembly, and O-ring.
  
  Fig 2: Locating Oil Cooler Union Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002