Engine Cooling System: Radiator: Inspection

INSPECT LOCK PLATE FOR DAMAGE
1. Inspect the lock plate for damage.
  HINT:
  - Reassembly of a deformed tank will be impossible. Therefore, first correct the shape of the lock plate groove with pliers or a similar tool, if necessary.
  - Water leakage will result if the bottom of the lock plate groove is damaged or dented. Repair or replace the locking plate if necessary.
  NOTE: The radiator can only be crimped 3 times. After recrimping 2 times, the radiator core must be replaced.
  
  Fig 1: Identifying Lock Plate
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002