LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Sienna LE, AWD >> Repair and Diagnosis >> Engine Mechanical >> Auxiliary Emission Control Systems >> Emission Control System >> Purge Valve >> Installation

Purge Valve: Installation

  1. INSTALL PURGE VSV 
    1. Install the Purge VSV with the bolt.

      Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf) 

      Fig 1: Locating Bolt And No. 1 Vacuum Switching Valve
      G04975168Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Connect the 2 vacuum hoses and No. 1 vacuum switching valve connector.
      3. Fig 2: Locating Vacuum Hoses And No. 1 Vacuum Switching Valve Connector
      G04975167Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL V-BANK COVER SUB-ASSEMBLY  (See INSTALLATION )
  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
scientia non olet · About LEMON Manuals