LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Sienna LE, AWD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Engine Immobilizer >> Engine Immobiliser System >> DTC Check / Clear

DTC Check / Clear

  1. CHECK DTC 
    1. Connect Techstream to the DLC3.
    2. Turn the ignition switch on.
    3. Turn the tester ON.
    4. Enter the following menus: Body Electrical / Immobiliser / Trouble Codes.
    5. Check the DTC(s) and freeze frame data, and then write down.
    6. Check the details of the DTC(s) (See DTC CHECK / CLEAR  ).
  2. CLEAR THE DTC 
    1. Connect Techstream to the DLC3.
    2. Turn the ignition switch on.
    3. Turn the tester on.
    4. Enter the following menus: Body Electrical / Immobiliser / Trouble Codes.
    5. Erace the DTCs.
scientia non olet · About LEMON Manuals