Data List / Active Test

1. The wireless door lock control data list can be displayed while the Techstream is connected to the DLC3 with the ignition switch in the ON position. Follow the prompts on the tester screen to access the DATA LIST.

   BODY: 

   DATA LIST
   
   

   Tester Display	Measurement Item/Range	Normal Condition
   IG SW	Ignition switch signal / ON or OFF	ON: Ignition switch ON or START OFF: Ignition switch OFF or ACC
   Key Unlock Warning SW	Unlock warning switch / ON or OFF	ON: Ignition key is inserted OFF: Ignition key is not inserted
   Wireless Control	Wireless door lock control function / ON or OFF	ON: Operates OFF: Does not operate
   Hazard Answer Back	Hazard answer-back of wireless / ON or OFF	ON: Operates OFF: Does not operate
   Open Door Warning	Open door warning / ON or OFF	ON: Operates OFF: Does not operate
   Auto Lock Time	Automatic lock time / 60 s or 30 s	60 s: 60 seconds 30 s: 30 seconds
   Unlock 2 Operation	2 times operation of wireless unlock / ON or OFF	ON: All doors unlock when UNLOCK pressed twice OFF: All doors unlock when UNLOCK pressed once
   Panic Function	Panic function / ON or OFF	ON: Operates OFF: Does not operate
   Wireless Buzzer Resp	Wireless door lock buzzer response / ON or OFF	ON: Operates OFF: Does not operate

HINT:

Performing the Active Test using the Techstream allows components such as the relay, VSV and actuator to operate without removing parts. Performing the Active Test as the first step in troubleshooting is one way to shorten labor time. It is possible to display the Data List during the Active Test.

1. Connect Techstream to the DLC3.
2. Turn the ignition switch to the ON position.
3. According to the display on the tester, preform the Active Test.

   HINT:

   The ignition switch must be turned to the ON position to proceed with the Active Test using the Techstream.

   BODY: 

   ACTIVE TEST
   
   

   Tester Display	Test Part	Control Range
   Hazard	Turn signal flasher relay	ON / OFF
   Wireless Buzzer	Wireless door lock buzzer	ON / OFF