LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Sienna LE, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting System >> Rear Combination Light Assembly >> Installation

Rear Combination Light Assembly: Installation

  1. INSTALL REAR COMBINATION LIGHT ASSEMBLY 
    1. Connect the connector.
    2. Install the rear combination light assembly with the 2 bolts and 2 pins as shown in the illustration.

      Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

  2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    Fig 1: Installing Rear Combination Light Assembly With Bolts And Pins
    G05140812Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals