LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Sienna LE, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting System >> Back-Up Light Assembly >> Installation

Back-Up Light Assembly: Installation

  1. INSTALL BACK-UP LIGHT ASSEMBLY 
    1. Connect the connector.
    2. Install the back-up light assembly with the 4 nuts and 2 claws.
      3. Fig 1: Identifying Back-Up Light Assembly With Nuts And Claws
      G05140815Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL BACK DOOR TRIM BOARD ASSEMBLY 
  3. INSTALL BACK DOOR PULL STRAP 
  4. INSTALL BACK DOOR STRAP COVER 
  5. INSTALL BACK DOOR SIDE GARNISH RH 
  6. INSTALL BACK DOOR SIDE GARNISH LH 
  7. INSTALL BACK DOOR GARNISH CENTER 
scientia non olet · About LEMON Manuals