LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Power Outlets) >> Power Outlet Socket >> Removal

Power Outlet Socket: Removal

WARNING: This page is about a different car, the 2009 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL LH  (See REMOVAL )
  2. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL RH  (See REMOVAL )
  3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)  (See REMOVAL )
  4. REMOVE CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Manual Transaxle)  (See REMOVAL )
  5. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle)  (See REMOVAL )
  6. REMOVE CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Automatic Transaxle)  (See REMOVAL )
  7. REMOVE INSTRUMENT PANEL BOX ASSEMBLY  (See REMOVAL )
  8. REMOVE POWER OUTLET SOCKET ASSEMBLY 
    1. Using a screwdriver, disengage the claw and remove the power outlet socket assembly.
    Fig 1: Removing Power Outlet Socket Assembly Claws
    G06016578Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  9. REMOVE POWER OUTLET SOCKET COVER 
    1. Disengage the 2 claws and remove the power outlet socket cover.
    Fig 2: Removing Power Outlet Socket Cover And Claws
    G06016579Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals