LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Power Outlets) >> Power Outlet Socket >> Installation

Power Outlet Socket: Installation

WARNING: This page is about a different car, the 2009 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL POWER OUTLET SOCKET COVER 
    1. Engage the 2 claws and install the power outlet socket cover.
    Fig 1: Installing Power Outlet Socket Cover And Claws
    G06016580Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL POWER OUTLET SOCKET ASSEMBLY 
    1. Engage the claw and install the power outlet socket assembly.
  3. INSTALL INSTRUMENT PANEL BOX ASSEMBLY  (See INSTALLATION )
  4. INSTALL CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Manual Transaxle)  (See INSTALLATION )
  5. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)  (See INSTALLATION )
    Fig 2: Installing Power Outlet Socket Assembly And Claw
    G06016581Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. INSTALL CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Automatic Transaxle)  (See INSTALLATION )
  7. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle)  (See INSTALLATION )
  8. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL LH  (See INSTALLATION )
  9. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL RH  (See INSTALLATION )
scientia non olet · About LEMON Manuals