Cigarette Lighter: Installation

WARNING: This page is about a different car, the 2009 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL CIGARETTE LIGHTER ASSEMBLY
1. Align the cigarette lighter socket with the notch on the instrument panel box assembly, then install it.
  
  Fig 1: Aligning Cigarette Lighter Socket With Notch
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the cigarette lighter retainer.
  
  Fig 2: Identifying Cigarette Lighter Retainer
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Turn the cigarette lighter nut to install it.
  
  Fig 3: Installing Cigarette Lighter Nut
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Engage the clamp and connect the connector.
5. Connect the connector.
INSTALL INSTRUMENT PANEL BOX ASSEMBLY (See INSTALLATION )
INSTALL CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Manual Transaxle) (See INSTALLATION )
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) (See INSTALLATION )

Fig 4: Identifying Cigarette Lighter Assembly Clamp And Connector
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Automatic Transaxle) (See INSTALLATION )
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle) (See INSTALLATION )
INSTALL LOWER INSTRUMENT PANEL FINISH PANEL LH (See INSTALLATION )
INSTALL LOWER INSTRUMENT PANEL FINISH PANEL RH (See INSTALLATION )