LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Service Specifications) >> M/T Clutch >> Service Data

Service Data

WARNING: This page is about a different car, the 2009 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
CLUTCH SERVICE DATA

Pedal height from dash panel 2AZ-FE 166.4 to 176.4 mm (6.551 to 6.945 in.)
2ZR-FE 157.7 to 167.7 mm (6.209 to 6.602 in.)
Pedal free play - 5.0 to 15.0 mm (0.197 to 0.591 in.)
Push rod play at pedal top - 1.0 to 5.0 mm (0.0394 to 0.197 in.)
Clutch release point from pedal full stroke end position - 25 mm (0.984 in.) or more
Clutch disc rivet depth Minimum 0.3 mm (0.0118 in.)
Clutch disc runout Maximum 0.8 mm (0.0315 in.)
Diaphragm spring finger wear Maximum depth 0.5 mm (0.0197 in.)
Maximum width 6.0 mm (0.236 in.)
Flywheel runout Maximum 0.1 mm (0.00394 in.)
Diaphragm spring tip non-alignment Maximum 0.9 mm (0.0354 in.)
Clutch pedal switch resistance ON (pushed in) Blow 1 Ω
OFF (released) 10 kΩ or higher