LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Sienna CE >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Engine Fuel System >> Fuel Sender Gauge Assembly >> Inspection

Fuel Sender Gauge Assembly: Inspection

  1. INSPECT FUEL SENDER GAUGE ASSEMBLY 
    1. Disconnect the connector from the fuel sender gauge.
    2. Check that the float moves smoothly between F and E.
    3. Measure the resistance between terminals 1 and 2 of the connector according to the value(s) in the table below.

      Standard resistance: Fuel sender gauge 

      TERMINALS RESISTANCE CHART

      Float Level Resistance (Ω)
      F 13.5 to 16.5
      Between E and F 13.5 to 414.5 (Gradually changes)
      E 405.5 to 414.5

      HINT:

      If the value is not as specified, replace the fuel sender gauge assembly.

      Fig 1: Identifying Fuel Sender Gauge Assembly Connector Terminals
      G05140987Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals