LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Sienna CE >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control >> Vehicle Stability Control System >> C1440/98 Steering Angle Sensor Unusual Bank Angle Detected >> Inspection Procedure

Inspection Procedure

NOTE:
  • When replacing the brake actuator assembly, perform zero point calibration.
  • Before proceeding with the inspection, explain to the customer that the vehicle driving record shows that the vehicle was driven on a bank at an angle of 30°, and confirm that this condition occurred.

    • HINT: 

    When U0123/62, U0124/95 and/or U0126/63 is output together with C1440/98, inspect and repair the trouble areas indicated by U0123/62, U0124/95 and/or U0126/63 first.

scientia non olet · About LEMON Manuals