Inspection Procedure
HINT:
After the inspection completed, clear the DTCs.
NOTE:
- This code may be output even if there is no malfunction.
- If this code is output frequently, replace the navigation receiver assembly.
- CLEAR DTC
- Clear the DTCs (See DTC CHECK / CLEAR
).
HINT:
These DTCs do not indicate a malfunction.
- Clear the DTCs (See DTC CHECK / CLEAR
).
- RECHECK DTC
- Recheck for DTCs and check if the same trouble occurs again.
OK: Malfunction disappears.
NG: REPLACE NAVIGATION RECEIVER ASSEMBLY
OK: END
- Recheck for DTCs and check if the same trouble occurs again.