LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Sequoia Limited, 5.7 W >> Repair and Diagnosis >> Transmission >> Transfer Case >> Transfer Assembly >> Installation

Transfer Assembly: Installation

  1. INSTALL TRANSFER ASSEMBLY 
    1. Install the transfer with the 8 bolts.

      Torque: 40 N*m (408 kgf*cm, 30 ft.*lbf) 

      NOTE: Take care not to damage the rear adaptor oil seal with the transfer input gear spline.
      Fig 1: Pulling Transfer Assembly
      G05158955Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL AUTOMATIC TRANSMISSION (for A750F) 
    1. Install the automatic transmission with transfer assembly (See INSTALLATION ).
  3. INSTALL AUTOMATIC TRANSMISSION (for AB60F) 
    1. Install the automatic transmission with transfer assembly (See INSTALLATION ).
  4. ADD TRANSFER OIL  (See ON-VEHICLE INSPECTION  )
  5. CHECK TRANSFER OIL  (See ON-VEHICLE INSPECTION  )
  6. INSPECT FOR TRANSFER OIL LEAK 
scientia non olet · About LEMON Manuals