LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Sequoia Limited, 5.7 W >> Repair and Diagnosis >> Suspension >> Suspension Control Systems >> Height Control Sensor >> Removal

Height Control Sensor: Removal

  1. REMOVE REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH 
    1. Put matchmarks on the rear height control sensor link and bracket.
    2. Remove the nut and disconnect the rear height control sensor link.
      Fig 1: Locating Rear Height Control Sensor Link Nut
      G05649246Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Disconnect the rear height control sensor connector.
    4. Remove the nut and the rear height control sensor.
      Fig 2: Locating Rear Height Control Sensor Connector And Nut
      G05649247Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002