Height Control Compressor: Removal

REMOVE REAR BUMPER COVER
(See REMOVAL )
REMOVE HEIGHT CONTROL NO. 1 COMPRESSOR
1. Remove the 3 clips and compressor cover.
2. Disconnect the hose.
3. Disconnect the 2 wire harness connectors.
4. Disconnect the height control tube (See PRECAUTION ).
5. Remove the 3 bolts and height control compressor.
REMOVE HEIGHT CONTROL FILTER
1. Disconnect the 2 hoses.
  
  Fig 1: Locating Height Control Filter Hoses
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the 2 bolts and the height control filter.
  
  Fig 2: Locating Height Control Filter Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE HEIGHT CONTROL COMPRESSOR BRACKET
1. Disconnect the 3 wire harness clamps.
  
  Fig 3: Identifying Height Control Compressor Bracket Wire Harness Clamps
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the 3 bolts and the bracket from the height control compressor.
  
  Fig 4: Locating Height Control Compressor Bolts And Bracket
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002