Height Control Compressor: Installation

INSTALL HEIGHT CONTROL COMPRESSOR BRACKET
1. Install the height control compressor bracket with the 3 bolts.
  Torque: 5.9 N*m (60 kgf*cm, 52 in.*lbf)
  
  Fig 1: Identifying Height Control Compressor Bracket With Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the wire harness clamps.
  
  Fig 2: Identifying Height Control Compressor Bracket Wire Harness Clamps
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL HEIGHT CONTROL FILTER
1. Install the height control filter with the 2 bolts.
  Torque: 6.4 N*m (65 kgf*cm, 57 in.*lbf)
2. Connect the 2 hoses.
  
  Fig 3: Locating Height Control Filter With Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL HEIGHT CONTROL NO. 1 COMPRESSOR
1. Install the height control compressor with the 3 bolts.
  Torque: 29 N*m (296 kgf*cm, 21 ft.*lbf)
2. Connect the height control tube (See PRECAUTION ).
3. Connect the 2 wire harness connectors.
4. Connect the hoses with 4 new clips.
5. Install the compressor cover with 3 new clips.
INSTALL REAR BUMPER COVER
(See INSTALLATION )

Fig 4: Locating Height Control Compressor With Bolts
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002