LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Sequoia Limited, 5.7 W >> Repair and Diagnosis >> Suspension >> Suspension Control Systems >> Front Acceleration Sensor >> Removal

Front Acceleration Sensor: Removal

  1. REMOVE FRONT DOOR SCUFF PLATE LH  (See REMOVAL )
  2. REMOVE FRONT DOOR SCUFF PLATE RH  (See REMOVAL )
  3. REMOVE COWL SIDE TRIM BOARD LH  (See REMOVAL )
  4. REMOVE COWL SIDE TRIM BOARD RH  (See REMOVAL )
  5. REMOVE INSTRUMENT SIDE PANEL LH  (See REMOVAL )
  6. REMOVE INSTRUMENT SIDE PANEL RH  (See REMOVAL )
  7. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY  (See REMOVAL )
  8. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH  (See REMOVAL )
  9. REMOVE NO. 1 INSTRUMENT PANEL SAFETY PAD INSERT  (See REMOVAL )
  10. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY  (See REMOVAL )
  11. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY RH  (See REMOVAL )
  12. REMOVE ACCELERATION SENSOR ASSEMBLY (for LH Side) 
    1. Disconnect the acceleration sensor connector.
    2. Remove the nut and the acceleration sensor.
      Fig 1: Locating Acceleration Sensor Connector And Nut (For LH Side)
      G05649262Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  13. REMOVE ACCELERATION SENSOR ASSEMBLY (for RH Side) 
    1. Disconnect the acceleration sensor connector.
    2. Remove the nut and the acceleration sensor.
      Fig 2: Locating Acceleration Sensor Connector And Nut (For LH Side)
      G05649263Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals