LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Sequoia Limited, 5.7 W >> Repair and Diagnosis >> Suspension >> Suspension Control Systems >> Front Acceleration Sensor >> Installation

Front Acceleration Sensor: Installation

  1. INSTALL ACCELERATION SENSOR ASSEMBLY (for LH Side) 
    1. Install the acceleration sensor with the nut.

      Torque: 8.5 N*m (87 kgf*cm, 75 in.*lbf) 

    2. Connect the acceleration sensor connector.
      Fig 1: Locating Acceleration Sensor With Nut
      G05649262Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL ACCELERATION SENSOR ASSEMBLY (for RH Side) 
    1. Install the acceleration sensor with the nut.

      Torque: 8.5 N*m (87 kgf*cm, 75 in.*lbf) 

    2. Connect the acceleration sensor connector.
  3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY RH  (See INSTALLATION )
  4. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY  (See INSTALLATION )
    Fig 2: Locating Acceleration Sensor Connector And Nut
    G05649263Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD INSERT  (See INSTALLATION )
  6. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH  (See INSTALLATION )
  7. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY  (See INSTALLATION )
  8. INSTALL INSTRUMENT SIDE PANEL LH  (See INSTALLATION )
  9. INSTALL INSTRUMENT SIDE PANEL RH  (See INSTALLATION )
  10. INSTALL COWL SIDE TRIM BOARD LH  (See INSTALLATION )
  11. INSTALL COWL SIDE TRIM BOARD RH  (See INSTALLATION )
  12. INSTALL FRONT DOOR SCUFF PLATE LH  (See INSTALLATION )
  13. INSTALL FRONT DOOR SCUFF PLATE RH  (See INSTALLATION )
scientia non olet · About LEMON Manuals