Absorber Control Switch: Inspection

INSPECT SUSPENSION CONTROL SWITCH

Measure the resistance according to the value(s) in the table below.

Standard Resistance

TESTER CONNECTION SPECIFIED CONDITION REFERENCE CHART

Tester Connection	Switch Condition	Specified Condition
9 (ECU1) - 7 (GND)	SPORT position	Below 1 Ω
9 (ECU1) - 7 (GND)	Normal position	10 kΩ or higher
8 (ECU2) - 7 (GND)	COMFORT position	Below 1 Ω
8 (ECU2) - 7 (GND)	Normal position	10 kΩ or higher

Fig 1: Identifying Absorber Control Switch Connector Terminals

G05649277

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002