LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> RAV4 Limited, 2.5 F, AWD >> Repair and Diagnosis >> Transmission >> Transfer Case >> Transfer Assembly >> Removal

Transfer Assembly: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  2. REMOVE ENGINE ASSEMBLY WITH AUTOMATIC TRANSAXLE 
    1. for 2AR-FE:

      Remove the engine with automatic transaxle (see REMOVAL ).

    2. for 2GR-FE:

      Remove the engine with automatic transaxle (see REMOVAL )

  3. REMOVE REAR ENGINE MOUNTING BRACKET (for 2GR-FE)  (See REMOVAL )
  4. REMOVE REAR ENGINE MOUNTING BRACKET (for 2AR-FE)  (See REMOVAL )
  5. REMOVE TRANSFER ASSEMBLY 
    1. Remove the 6 nuts, 2 bolts and transfer from the transaxle.
      Fig 1: Locating Transfer Assembly Nuts And Bolts
      G05584685Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals