LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> RAV4 Base, 3.5 K, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Transfer Case) >> 4WD Control Ecu >> Removal

4WD Control Ecu: Removal

WARNING: This page is about a different variant/trim than selected.
  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  2. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY  (See DISASSEMBLY )
  3. REMOVE 4WD CONTROL ECU 
    1. Disconnect the connector.
  4. Remove the bolt and ECU.
scientia non olet · About LEMON Manuals