LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> RAV4 Base, 2.5 F, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Fuel System (2GR-FE)) >> Fuel Pump Resistor >> Installation

Fuel Pump Resistor: Installation

WARNING: This page is about a different variant/trim than selected.
  1. INSTALL FUEL PUMP RESISTOR 
    1. Install the resistor with the 2 nuts.

      Torque: 7.0 N*m (71.4 kgf*cm, 62 in.*lbf) 

    2. Connect the connector.
  2. INSTALL FUEL PUMP RESISTOR COVER 
    1. Install the cover to the resistor.
  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    Fig 1: Locating Fuel Pump Resistor Nuts
    G05998608Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals