LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> RAV4 Base, 2.5 F, AWD >> Repair and Diagnosis >> Transmission >> Transfer Case >> 4WD Control Ecu >> Removal

4WD Control Ecu: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  2. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY  (See DISASSEMBLY )
  3. REMOVE 4WD CONTROL ECU 
    1. Disconnect the connector.
  4. Remove the bolt and ECU.
scientia non olet · About LEMON Manuals