Speed Sensor: Installation

INSTALL SPEED SENSOR NC
1. Coat a new O-ring with ATF.
2. Install the O-ring to the sensor.
3. Install the sensor with the bolt.
  Torque: 11 N*m (112 kgf*cm, 8 ft.*lbf)
4. Connect the sensor connector.
  
  Fig 1: Locating Speed Sensor NC Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL SPEED SENSOR NT
1. Coat a new O-ring with ATF.
2. Install the O-ring to the sensor.
3. Install the sensor with the bolt.
  Torque: 11 N*m (112 kgf*cm, 8 ft.*lbf)
4. Connect the sensor connector.
  
  Fig 2: Locating Speed Sensor NT Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL BATTERY
1. Install the battery bracket reinforcement with the 2 bolts.
  Torque: 20 N*m (204 kgf*cm, 15 ft.*lbf)
2. Install the battery carrier with the 4 bolts.
  Torque: 20 N*m (204 kgf*cm, 15 ft.*lbf)
3. Install the battery tray.
4. Install the battery with the battery clamp.
  Torque: 17 N*m (168 kgf*cm, 21 ft.*lbf) for bolt
  
  5.0 N*m (51 kgf*cm, 44 in.*lbf) for nut
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL