LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> RAV4 Base, 2.5 F, AWD >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Air Conditioning >> Blower Unit >> Disassembly

Blower Unit: Disassembly

  1. REMOVE HEATER TO REGISTER DUCT ASSEMBLY 
    1. Detach the 7 claws and register duct.
      Fig 1: Identifying Register Duct Claws
      G05585401Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE AIR FILTER CASE 
    1. Detach the 2 claws and remove the air filter case.
    2. Remove the air filter.
      Fig 2: Identifying Air Filter Case Claws
      G05585402Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE AIR INLET CONTROL SERVO MOTOR (for Manual Air Conditioning System) 
    1. Remove the 3 screws and air inlet servo motor.
      Fig 3: Identifying Air Inlet Servo Motor Screws
      G05585403Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE AIR INLET CONTROL SERVO MOTOR (for Automatic Air Conditioning System) 
    1. Detach the claws and lever.
      Fig 4: Identifying Claws And Lever
      G05585404Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 3 screws and air inlet servo motor.
      Fig 5: Identifying Air Inlet Servo Motor Screws
      G05585405Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE BLOWER RESISTOR (for Manual Air Conditioning System) 
    1. Remove the 2 screws and blower resistor.
      Fig 6: Locating Blower Resistor Screws
      G05585406Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. REMOVE BLOWER MOTOR 
    1. Remove the 3 screws and blower motor.
      Fig 7: Locating Blower Motor Screws
      G05585407Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals