Service Data
PARKING BRAKE - SERVICE DATA
| Parking brake lever travel PB-2 | Pull the lever upward with a force of approximately 200 N (20 kgf, 44 lbf) and count the number of clicks. | 6 to 8 clicks (without rear brake dragging) | |
| Parking brake switch PB-4 | Resistance 1 - Body ground | Parking brake switch ON (Switch pin released) | Below 1 Ω |
| Resistance 1 - Body ground | Parking brake switch OFF (Switch pin pushed in)) | 10 kΩ or higher | |
| Brake disc inside diameter PB-14 | Standard | 172 mm (6.77 in.) | |
| Maximum | 173 mm (6.81 in.) | ||
| Parking brake shoe lining thickness PB-14 | Standard | 3.5 mm (0.138 in.) | |
| Minimum | 1.0 mm (0.039 in.) | ||
| Parking brake shoe clearance adjustment PB-17 | Standard shoe adjuster return notch | 8 notches | |