DTC Check / Clear

CHECK DTC
1. Connect the Techstream to the DLC3.
2. Turn the engine switch on (IG) and turn the Techstream on.
3. Enter the following menus: Body Electrical / Main Body / Trouble codes.
4. Check the DTCs and write them down.
  HINT:
  
  For further information about using the Techstream, refer to the instruction manual.
5. Confirm the details of the DTCs.
CLEAR DTC
1. Connect the Techstream to the DLC3.
2. Turn the engine switch on (IG) (do not start the engine) and turn the Techstream on.
3. Enter the following menus: Body Electrical / Main Body / Trouble codes.
  HINT:
  
  Refer to the instruction manual for further details.
4. Clear the DTCs.
  HINT:
  
  For further information about using the Techstream, refer to the instruction manual.