Ignition Switch: Removal

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
REMOVE LOWER STEERING COLUMN COVER
1. Detach the 4 claws, release the tilt lever and remove the lower steering column cover.
  
  Fig 1: Identifying Lower Steering Column Cover Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE IGNITION SWITCH ASSEMBLY
1. Disconnect the ignition switch connector.
2. Detach the claw and disconnect the key interlock solenoid wire harness connector from the ignition switch connector.
  
  Fig 2: Identifying Ignition Switch Assembly Claw And Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the 2 screws and ignition switch.
  
  Fig 3: Locating Ignition Switch Screw
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002