On-Vehicle Inspection
- REMOVE WINDSHIELD DEICER RELAY (Marking: DEICER)
- Remove the defogger relay from the engine room No. 2 relay block.
- INSPECT WINDSHIELD DEICER RELAY
- Measure the resistance of the relay.
Standard resistance
TESTER CONNECTION SPECIFIED CONDITIONTester Connection Specified Condition 3-5 10 kΩ or higher Below 1 Ω (when battery voltage is applied to terminals 1 and 2) If the result is not as specified, replace the relay.
- INSTALL WINDSHIELD DEICER RELAY