LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> RAV4 Base, 2.5 F, AWD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Engine Immobilizer >> ENGINE IMMOBILISER SYSTEM (w/Smart Key System) >> DTC Check/Clear

DTC Check/Clear

  1. CHECK DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the engine switch on (IG) and turn the Techstream on.
    3. Select the following menu items: Body Electrical/(desired system)/Trouble Codes.
    4. Check DTCs and then write them down.

      HINT:

      Refer to the Techstream operator's manual for further details.

    5. Confirm the details of the DTCs (see DIAGNOSTIC TROUBLE CODE CHART  ).
  2. CLEAR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the engine switch on (IG) (do not start the engine) and turn the Techstream on.
    3. Select the following menu items: Body Electrical/(desired system)/Trouble Codes.
    4. Erase the DTCs.
scientia non olet · About LEMON Manuals