DTC Check / Clear

CHECK DTC
1. Connect the Techstream to the DLC3.
2. Turn the ignition switch ON and turn the Techstream on.
3. Select the following menu items: Body Electrical / Main Body / Trouble Codes.
4. Check DTCs and then write them down.
  HINT:
  
  Refer to the Techstream operator's manual for further details.
5. Confirm the details of the DTCs (see DIAGNOSTIC TROUBLE CODE CHART ).
CLEAR DTC
1. Connect the Techstream to the DLC3.
2. Turn the ignition switch ON (do not start the engine) and turn the Techstream on.
3. Select the following menu items: Body Electrical / Main Body / Trouble Codes.
4. Erase the DTCs.