LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> RAV4 Base, 2.5 F, AWD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Door Lock >> Door Control Switch Inspection

Door Control Switch Inspection

  1. INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (DOOR CONTROL SWITCH) 
    1. Measure the resistance of the door control switch.

    Standard resistance 

    TESTER CONNECTION SPECIFIED CONDITION

    Tester Connection Switch Condition Specified Condition
    2 (L) - 1 (E) Lock Below 80 Ω
    2 (L) - 1 (E) OFF 10 kΩ or higher
    9 (UL) - 1 (E) Unlock Below 80 Ω
    9 (UL) - 1 (E) OFF 10 kΩ or higher

    If the result is not as specified, replace the power window regulator master switch assembly.

    Fig 1: Checking Power Window Regulator Master Switch Assembly (Door Control Switch)
    G05586096Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSPECT DOOR CONTROL SWITCH ASSEMBLY 
    1. Measure the resistance of the door control switch.

    Standard resistance 

    TESTER CONNECTION SPECIFIED CONDITION

    Tester Connection Switch Condition Specified Condition
    4 (L) - 3 (E) Lock Below 200 Ω
    4 (L) - 3 (E) OFF 10 kΩ or higher
    2 (UL) - 3 (E) Unlock Below 200 Ω
    2 (UL) - 3 (E) OFF 10 kΩ or higher

    If the result is not as specified, replace the door control switch assembly.

    Fig 2: Checking Door Control Switch Assembly
    G04980340Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals