Navigation Receiver: Installation

INSTALL NO. 2 RADIO BRACKET
1. Install the radio receiver bracket to the navigation receiver with the 4 screws.
  
  Fig 1: Locating Radio Receiver Bracket Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 1 RADIO BRACKET
1. Install the radio receiver bracket to the navigation receiver with the 4 screws.
INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
1. Attach the 4 claws to install the instrument cluster finish panel.
  
  Fig 2: Locating Radio Receiver Bracket Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Fig 3: Identifying Instrument Cluster Finish Panel Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NAVIGATION RECEIVER ASSEMBLY WITH BRACKET
1. Connect all the connectors to install the navigation receiver.
2. Insert the navigation receiver to attach the 2 claws and 4 clips on its backside.
3. Install the 4 bolts.
  Torque: 12.8 N*m (130 kgf*cm, 9 ft.*lbf)
  
  Fig 4: Locating Navigation Receiver Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL CENTER (See LOWER INSTRUMENT PANEL )
INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL CENTER (See LOWER INSTRUMENT PANEL )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL