LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> RAV4 Base, 2.5 F, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Audio/Visual >> Audio And Visual System >> Terminals Of Ecu

Terminals Of Ecu

  1. CHECK RADIO RECEIVER ASSEMBLY (for Separate Type Amplifier System) 
    Fig 1: Identifying E62 And E80 Receiver Connectors Terminals
    G06000149Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Disconnect the E62 and E80 receiver connectors.
    2. Measure the resistance and voltage of the wire harness side connector.
      TERMINAL DESCRIPTION CHART

      Symbols (Terminal No.) Wiring Color Terminal Description Condition Specified Condition
      GND (E62-20) - Body ground BR - Body ground Ground Always Below 1 Ω
      B (E62-1) - GND (E62-20) L - BR Battery Always 11 to 14 V
      ACC (E62-11) - GND (E62-20) GR - BR ACC power supply Ignition switch off Blow 1 V
      ACC (E62-11) - GND (E62-20) GR - BR ACC power supply Ignition switch ACC 11 to 14 V
      SNS2 (E80-1) - Body ground W-B - Body ground Ground Always Below 1 V

      HINT:

      If the result is not as specified, there may be a malfunction on the wire harness side.

    3. Reconnect the E62 and E80 receiver connectors.
    4. Measure the voltage of the connectors.
    TERMINAL DESCRIPTION CHART

    Symbols (Terminal No.) Wiring Color Terminal Description Condition Specified Condition
    ATX+ (E62-5) - GND (E62-20) R - BR AVC-LAN communication signal Ignition switch ACC 2 to 3 V
    ATX- (E62-15) - GND (E62-20) G - BR AVC-LAN communication signal Ignition switch ACC 2 to 3 V
    MUTE (E62-7) - GND (E62-20) P - BR Mute signal Audio system is playing → changing mode Above 3.5 V → Below 1 V
    L+ (E62-9) - GND (E62-20) R - BR Sound signal (left) Audio system is operating Waveform synchronized with sound is output
    L- (E62-19) - GND (E62-20) G - BR Sound signal (left) Audio system is operating Waveform synchronized with sound is output
    R- (E62-18) - GND (E62-20) W - BR Sound signal (right) Audio system is operating Waveform synchronized with sound is output
    R+ (E62-8) - GND (E62-20) B - BR Sound signal (right) Audio system is operating Waveform synchronized with sound is output
    SLD (E62-10) - GND (E62-20) Shielded - BR Shielded Always Below 1 V
    ALI (E49-17) - GND (E62-20) B - BR Sound signal (left) External device is playing (when stereo jack is used) Waveform synchronized with sound is output
    ARI (E49-15) - GND (E62-20) W - BR Sound signal (right) External device is playing (when stereo jack is used) Waveform synchronized with sound is output
    ASGN (E49-16) - Body ground R - Body ground Ground Always Below 1 V
    AGND (E49-18) - Body ground Shielded - Body ground Shielded ground Always Below 1 V
    AUXI (E49-19) - GND (E62-20) R - BR External input connection detection signal External device is connected Below 1 V
    ILL+ (E62-2) - GND (E62-20) G - BR Illumination signal Light control switch TAIL or HEAD 11 to 14 V
    ILL- (E62-12) - GND (E62-20) BR - BR Illumination signal Light control switch TAIL or HEAD Pulse generation
    SW1 (E49-7) - GND (E62-20) W - BR Steering pad switch signal Steering pad switch not pushed 4 V or more
    SW1 (E49-7) - GND (E62-20) W - BR Steering pad switch signal Steering pad switch SEEK+ switch pushed Approx. 0.5 V
    SW1 (E49-7) - GND (E62-20) W - BR Steering pad switch signal Steering pad switch SEEK- switch pushed Approx. 0.9 V
    SW1 (E49-7) - GND (E62-20) W - BR Steering pad switch signal Steering pad switch VOL+ switch pushed Approx. 2.0 V
    SW1 (E49-7) - GND (E62-20) W - BR Steering pad switch signal Steering pad switch VOL-switch pushed Approx. 3.4 V
    SW2 (E49-8) - GND (E62-20) R - BR Steering pad switch signal Steering pad switch not pushed 4 V or more
    SW2 (E49-8) - GND (E62-20) R - BR Steering pad switch signal Steering pad switch MODE switch pushed Below 0.5 V
    SW2 (E49-8) - GND (E62-20) R - BR Steering pad switch signal Steering pad switch ON HOOK switch pushed Approx. 0.9 V
    SW2 (E49-8) - GND (E62-20) R - BR Steering pad switch signal Steering pad switch OFF HOOK switch pushed Approx. 2.0 V
    SW2 (E49-8) - GND (E62-20) R - BR Steering pad switch signal Steering pad switch VOICE switch pushed Approx. 3.4 V
    SWG (E49-6) - Body ground B - Body ground Steering pad switch signal ground Always Below 1 V
    MIN- (E80-5) - GND (E62-20) R - BR Microphone voice signal "Bluetooth" handsfree function is ON A waveform synchronized with sounds is output
    MIN+ (E80-2) - GND (E62-20) W - BR Microphone voice signal "Bluetooth" handsfree function is ON A waveform synchronized with sounds is output
    MACC (E80-3) - GND (E62-20) B - BR Microphone AMP power supply Ignition switch off -> ON Below 1 V → 5 V
    SGND (E80-6) - Body ground Shielded - Body ground Shielded ground Always Below 1 V
    SPD (E49-3) - GND (E62-20) V - BR Speed signal from combination meter Ignition switch ON, drive wheels turned slowly Pulse generation
    ANT (E62-13) - GND (E62-20) B - BR Power source of antenna Radio switch ON and AM or FM 11 to 14 V
    IVO+ (E49-11) - GND (E62-20) B - BR Voice signal "Bluetooth" handsfree voice signal is playing A waveform synchronized with sounds is output
    IVO- (E49-12) - GND (E62-20) W - BR Voice signal "Bluetooth" handsfree voice signal is playing A waveform synchronized with sounds is output
    SLD1 (E49-13) - Body ground Shielded - Body ground Shielded ground Always Below 1 V

    HINT:

    If the result is not as specified, the receiver may have a malfunction.

  2. CHECK RADIO RECEIVER (for Built-in Type Amplifier System) 
    Fig 2: Identifying E47 Receiver Connector Terminals
    G06000150Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Disconnect the E47 receiver connector.
    2. Measure the resistance and voltage of the wire harness side connector.
      TERMINAL DESCRIPTION CHART

      Symbols (Terminal No.) Wiring Color Terminal Description Condition Specified Condition
      GND (E47-7) - Body ground BR - Body ground Ground Always Below 1 Ω
      B (E47-4) - GND (E47-7) L - BR Battery Always 11 to 14 V
      ACC (E47-3) - GND (E47-7) GR - BR ACC power supply Ignition switch off Below 1 V
      ACC (E47-3) - GND (E47-7) GR - BR ACC power supply Ignition switch ACC 11 to 14 V

      HINT:

      If the results is not as specified, there may be a malfunction on the wire harness side.

    3. Reconnect the E47 receiver connector.
    4. Measure the voltage of the connectors.
    TERMINAL DESCRIPTION CHART

    Symbols (Terminal No.) Wiring Color Terminal Description Condition Specified Condition
    FL+ (E47-2) - GND (E47-7) P - BR Sounds signal (front left) Audio system is operating Waveform synchronized with sound is output
    FL- (E47-6) - GND (E47-7) V - BR Sounds signal (front left) Audio system is operating Waveform synchronized with sound is output
    FR+ (E47-1) - GND (E47-7) LG - BR Sounds signal (front right) Audio system is operating Waveform synchronized with sound is output
    FR- (E47-5) - GND (E47-7) L - BR Sounds signal (front right) Audio system is operating Waveform synchronized with sound is output
    RL+ (E48-2) - GND (E47-7) B - BR Sounds signal (rear left) Audio system is operating Waveform synchronized with sound is output
    RL- (E48-6) - GND (E47-7) Y - BR Sounds signal (rear left) Audio system is operating Waveform synchronized with sound is output
    RR+ (E48-1) - GND (E47-7) R - BR Sounds signal (rear right) Audio system is operating Waveform synchronized with sound is output
    RR- (E48-3) - GND (E47-7) W - BR Sounds signal (rear left) Audio system is operating Waveform synchronized with sound is output
    SPD (E49-3) - GND (E47-7) V - BR Speed signal Ignition switch ON Drive wheels are turned slowly Pulse generation
    ALI (E49-17) - GND (E47-7) B - BR Sound signal (left) External device is playing (when stereo jack is used) Waveform synchronized with sound is output
    ARI (E49-15) - GND (E47-7) W - BR Sound signal (right) External device is playing (when stereo jack is used) Waveform synchronized with sound is output
    ASGN (E49-16) - Body ground R - Body ground Ground Always Below 1 V
    AGND (E49-18) - Body ground Shielded - Body ground Shielded ground Always Below 1 V
    AUXI (E49-19) - GND (E47-7) R - BR External input connection detection signal External device is connected Below 1 V
    ILL+ (E47-10) - GND (E47-7) G - BR Illumination signal Light control switch TAIL or HEAD 11 to 14 V
    ILL- (E48-5) - GND (E47-7) BR - BR Illumination signal Light control switch TAIL or HEAD Pulse generation
    SW1 (E49-7)* - GND (E47-7) W - BR Steering pad switch signal Steering pad switch not pushed 4 V or more
    SW1 (E49-7)* - GND (E47-7) W - BR Steering pad switch signal Steering pad switch SEEK+ switch pushed Approx. 0.5 V
    SW1 (E49-7)* - GND (E47-7) W - BR Steering pad switch signal Steering pad switch SEEK- switch pushed Approx. 0.9 V
    SW1 (E49-7)* - GND (E47-7) W - BR Steering pad switch signal Steering pad switch VOL+ switch pushed Approx. 2.0 V
    SW1 (E49-7)* - GND (E47-7) W - BR Steering pad switch signal Steering pad switch VOL-switch pushed Approx. 3.4 V
    SW2 (E49-8)* - GND (E47-7) R - BR Steering pad switch signal Steering pad switch not pushed 4 V or more
    SW2 (E49-8)* - GND (E47-7) R - BR Steering pad switch signal Steering pad switch MODE switch pushed Below 0.5 V
    SWG (E49-6)* - Body ground B - Body ground Steering pad switch signal ground Always Below 1 V
    ANT (E47-8) - GND (E47-7) B - BR Power source of antenna Radio switch ON and AM or FM 11 to 14 V
    HINT:
    *: with CD Changer
    If the result is not as specified, the receiver may have a malfunction.
  3. CHECK STEREO COMPONENT AMPLIFIER (for Separate Type Amplifier System) 
    Fig 3: Identifying L13, L14 And L15 Amplifier Connectors Terminals
    G05184723Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Disconnect the L13, L14 and L15 amplifier connectors.
    2. Measure the resistance and voltage of the wire harness side connectors.
      TERMINAL DESCRIPTION CHART

      Symbols (Terminal No.) Wiring Color Terminal Description Condition Specified Condition
      +B (L15-1) - Body ground L - Body ground Battery Always 11 to 14 V
      +B2 (L15-5) - Body ground L - Body ground Battery Always 11 to 14 V
      ACC (L13-12) - Body ground GR - Body ground ACC power supply Ignition switch ACC 11 to 14 V
      GND (L14-6) - Body ground W-B - Body ground Ground Always Below 1 Ω
      GND2 (L14-7) - Body ground W-B - Body ground Ground Always Below 1 Ω

      HINT:

      If the results is not as specified, there may be a malfunction on the wire harness side.

    3. Reconnect the L13, L14 and L15 amplifier connectors.
    4. Measure the voltage of the connectors.
    TERMINAL DESCRIPTION CHART

    Symbols (Terminal No.) Wiring Color Terminal Description Condition Specified Condition
    TX+ (L13-8) - GND (L14-6) R - W-B AVC-LAN communication signal Ignition switch ACC 2 to 3 V
    TX- (L13-7) - GND (L14-6) G - W-B AVC-LAN communication signal Ignition switch ACC 2 to 3 V
    MUTE (L13-1) - GND (L14-6) P - W-B Mute signal Audio system playing → changing mode Above 3.5 V → Below 1 V
    L+ (L13-3) - GND (L14-6) R - W-B Sound signal (left) Audio system is operating Waveform synchronized with sound is output
    L- (L13-2) - GND (L14-6) G - W-B Sound signal (left) Audio system is operating Waveform synchronized with sound is output
    R- (L13-4) - GND (L14-6) W - W-B Sound signal (right) Audio system is operating Waveform synchronized with sound is output
    R+ (L13-5) - GND (L14-6) B - W-B Sound signal (right) Audio system is operating Waveform synchronized with sound is output
    FR- (L14-3) - GND (L14-6) L - W-B Sound signal (front right) Audio system is operating Waveform synchronized with sound is output
    FR+ (L14-9) - GND (L14-6) LG - W-B Sound signal (front right) Audio system is operating Waveform synchronized with sound is output
    FR- (L15-6) - GND (L14-6) L - W-B Sound signal (front right) Audio system is operating Waveform synchronized with sound is output
    FR+ (L15-2) - GND (L14-6) LG - W-B Sound signal (front right) Audio system is operating Waveform synchronized with sound is output
    FL- (L14-1) - GND (L14-6) V - W-B Sound signal (front left) Audio system is operating Waveform synchronized with sound is output
    FL+ (L14-2) - GND (L14-6) P - W-B Sound signal (front left) Audio system is operating Waveform synchronized with sound is output
    FL- (L15-7) - GND (L14-6) V - W-B Sound signal (front left) Audio system is operating Waveform synchronized with sound is output
    FL+ (L15-8) - GND (L14-6) P - W-B Sound signal (front left) Audio system is operating Waveform synchronized with sound is output
    RL+ (L15-3) - GND (L14-6) B - W-B Sound signal (rear left) Audio system is operating Waveform synchronized with sound is output
    RL- (L15-9) - GND (L14-6) Y - W-B Sound signal (rear left) Audio system is operating Waveform synchronized with sound is output
    RR+ (L15-10) - GND (L14-6) R - W-B Sound signal (rear right) Audio system is operating Waveform synchronized with sound is output
    RR- (L15-4) - GND (L14-6) W - W-B Sound signal (rear right) Audio system is operating Waveform synchronized with sound is output
    WFL+ (L14-5) - GND (L14-6) B - W-B Sound signal (woofer) Audio system is operating Waveform synchronized with sound is output
    WFL- (L14-12) - GND (L14-6) G - W-B Sound signal (woofer) Audio system is operating Waveform synchronized with sound is output
    WFR- (L14-10) - GND (L14-6) V - W-B Sound signal (woofer) Audio system is operating Waveform synchronized with sound is output
    WFR+ (L14-4) - GND (L14-6) P - W-B Sound signal (woofer) Audio system is operating Waveform synchronized with sound is output
    SPD (L13-11) - GND (L14-6) V - W-B Speed signal Ignition switch ON Drive wheels are turned slowly Pulse generation
    INT+ (L13-23) - GND (L14-6) B - W-B Voice signal "Bluetooth" handsfree voice signal is playing A waveform synchronized with sounds is output
    INT- (L13-22) - GND (L14-6) W - W-B Voice signal "Bluetooth" handsfree voice signal is playing A waveform synchronized with sounds is output

    HINT.

    If the result is not as specified, the amplifier may have a malfunction.