Outer Rear View Mirror: Installation

INSTALL OUTER MIRROR COVER LH
1. Install the mirror cover as shown in the illustration.
  
  Fig 1: Installing Outer Mirror Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Check that there is no gap between the cover and mirror body.
  HINT:
  
  If there is a gap between the cover and body, noise will occur during driving.
  
  Fig 2: Identifying Gap Between Cover And Mirror Body
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Connect the 2 connectors.
  
  Fig 3: Connecting Connectors
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Attach the 4 claws to install the mirror.
  
  Fig 4: Installing Outer Mirror
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL OUTER REAR VIEW MIRROR ASSEMBLY LH
1. Install the mirror with the 3 nuts.
  Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf)
2. Connect the connector.
Fig 5: Installing Outer Rear View Mirror
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT DOOR TRIM BOARD SUBASSEMBLY LH (See REASSEMBLY )
INSTALL FRONT DOOR ARMREST BASE PANEL UPPER LH (See REASSEMBLY )
INSTALL DOOR PULL HANDLE (See REASSEMBLY )
INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH LH (See REASSEMBLY )
INSTALL FRONT DOOR INSIDE HANDLE BEZEL LH (See REASSEMBLY )
PERFORM INITIALIZATION
1. Perform INITIALIZATION .
  NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.