LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Matrix XRS, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Transmission - U250E >> Valve Body Assembly >> Removal

Valve Body Assembly: Removal

  1. REMOVE ENGINE UNDER COVER LH 
  2. DRAIN AUTOMATIC TRANSAXLE FLUID  (See AUTOMATIC TRANSAXLE FLUID )
  3. REMOVE AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY  (See AUTOMATIC TRANSAXLE FLUID )
  4. DISCONNECT TRANSMISSION WIRE 
    1. Disconnect the transmission wire from the 7 shift solenoid valve connectors.
    2. Remove the bolt and lock plate, and disconnect the ATF temperature sensor.
    Fig 1: Locating Shift Solenoid Valve Connectors
    G04975944Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE VALVE BODY OIL STRAINER ASSEMBLY 
    1. Remove the 3 bolts and oil strainer.
      NOTE: Be careful as some fluid will come out of the oil strainer.
      Fig 2: Locating Oil Strainer Bolts
      G04975957Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the O-ring from the oil strainer.
    Fig 3: Locating Oil Strainer O-Ring
    G04975958Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. REMOVE TRANSMISSION VALVE BODY ASSEMBLY 
    1. Support the valve body assembly and remove the 17 bolts and the valve body assembly.
      NOTE: Be careful not to drop the check ball body, spring or accumulator piston.
      Fig 4: Locating Valve Body Assembly Bolts
      G04975959Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the check ball body and spring.
      3. Fig 5: Identifying Check Ball Body And Spring
      G04975960Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. REMOVE MANUAL VALVE 
    1. Remove the manual valve from the valve body assembly.
scientia non olet · About LEMON Manuals