LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Matrix XRS, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Control System (2ZR-FE)) >> Crankshaft Position Sensor >> Removal

Crankshaft Position Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
  1. REMOVE ENGINE UNDER COVER RH 
  2. REMOVE CRANK POSITION SENSOR 
    1. Disconnect the crank position sensor connector.
    2. Remove the bolt and crank position sensor.
      Fig 1: Locating Bolt And Crank Position Sensor
      G05398770Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals