LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Matrix S, AWD >> Repair and Diagnosis >> Body & Frame >> Power Windows & Glass >> Rear Power Window Switch >> Inspection

Rear Power Window Switch: Inspection

  1. INSPECT POWER WINDOW SWITCH (for Rear LH) 
    1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance 

    RESISTANCE SPECIFIED CONDITION

    Tester Connection Switch Condition Specified Condition
    3 (B) - 4 (U)
    2 (SD) - 1 (D)    		 UP Below 1 Ω
    5 (SU) - 4 (U)
    2 (SD) - 1 (D)    		 OFF Below 1 Ω
    5 (SU) - 4 (U)
    3 (B) - 2 (SD)    		 DOWN Below 1 Ω

    If the result is not specified, replace the power window switch.

    Fig 1: Identifying Power Window Switch (Rear LH Side) Connector
    G06015897Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSPECT POWER WINDOW SWITCH (for Rear RH) 
    1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance 

    RESISTANCE SPECIFIED CONDITION

    Tester Connection Switch Condition Specified Condition
    3 (B) - 4 (U)
    2 (SD) - 1 (D)    		 UP Below 1 Ω
    5 (SU) - 4 (U)
    2 (SD) - 1 (D)    		 OFF Below 1 Ω
    5 (SU) - 4 (U)
    3 (B) - 2 (SD)    		 DOWN Below 1 Ω

    If the result is not specified, replace the power window switch.

    Fig 2: Identifying Terminals Of Power Window Switch (Rear RH Side) Connector
    G06015904Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals